|
|
Valve Train
|
|
|
|
MTS #15 - 472/500 Custom Cadillac Camshaft w/ Lifters
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs. MTS #15 Series Grinds: RPM range: 2200-5400/ Advertised duration range: 286-295* / Duration @ .050" range: 230-238* / Valve lift range: .520-.540". Forget the stealth stuff now. The MTS #15 series cam will have a thump at idle, about 950 RPM. This grind can produce 500 HP with 600 ft-lbs of torque. Street use is not a problem as there is enough vacuum to run power brakes. This cam has very strong mid-range power, to an even more impressive, huge top-end power band. Rev it up to 5200-5400 RPM in first gear, shift into second gear, and watch your left front fender yank right up from the torque. This cam becomes an animal and has an awesome response to 150-200 hp shot of nitrous oxide (NOS). RPM bands on the #15 grind are right at the edge, if not over the boundary of safety, for engines with stock connecting rods. Forged "H" beam rods are now preferred. This is the maximum grind for the MTS S/S Spring Kit. Aftermarket rocker assemblies are also necessary at this level of performance. Ported heads are strongly recommended. If you're going to pump up your motor to this kind of horsepower, you really need to make sure all of the components in your build can hold up to, and help promote, the performance of this cam. #15 grinds work best with a 3.23 to 3.73 rear gear ratios.
Price: $299.00
|
|
|
|
|
MTS #20 - 472/500 Custom Cadillac Camshaft
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs. MTS #20 Series Grinds: RPM range: 2800-6500/ Advertised duration range: 298* and higher / Duration @ .050" range: 240* and higher / Valve lift range: .550-.590". If you are considering an MTS #20 cam, you have to be really serious about wanting an awesome level of horsepower. An e-mail or phone call to us before you buy is highly recommended. The RPM range of this cam will now exceed the standard hydrolic lifter range, so Special, Anti Pump-Up Lifters are included in this kit. This cam requires forged "H" beam steel connecting rods, and aftermarket rocker assemblies are mandatory. The use of MTS' S/S/C valve springs and high performance ported iron (or MTS Aluminum) heads are needed to facilitate the power of this cam. Use a 3.73 or higher (numerically) rear gear. At this level of performance, you and MTS should work together to discuss the proper setup and cam info sheet for best results.
THIS CAM ROCKS!
Price: $224.95
|
|
|
|
|
MTS #20 - 472/500 Custom Cadillac Camshaft w/ Anti Pump-Up Lifters
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs. MTS #20 Series Grinds: RPM range: 2800-6500/ Advertised duration range: 298* and higher / Duration @ .050" range: 240* and higher / Valve lift range: .550-.590". If you are considering an MTS #20 cam, you have to be really serious about wanting an awesome level of horsepower. An e-mail or phone call to us before you buy is highly recommended. The RPM range of this cam will now exceed the standard hydrolic lifter range, so Special, Anti Pump-Up Lifters are included in this kit. This cam requires forged "H" beam steel connecting rods, and aftermarket rocker assemblies are mandatory. The use of MTS' S/S/C valve springs and high performance ported iron (or MTS Aluminum) heads are needed to facilitate the power of this cam. Use a 3.73 or higher (numerically) rear gear. At this level of performance, you and MTS should work together to discuss the proper setup and cam info sheet for best results.
THIS CAM ROCKS!
Price: $349.00
|
|
|
|
|
MTS #3 - 472/500 Custom Cadillac Camshaft
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs. MTS #3 Series Grinds: RPM range: Idle to 4000 / Advertised duration range: 250-255* / Duration @ .050" range: 198-205* / Valve lift range: .470-.480". #3 grinds are designed for maximum fuel ecconomy and work best in low-compression engines. When tuned to run 92-Octane fuel, the record is 22 MPG from a 1976, 500cid in a full sized Sedan Deville. Great bottom-end torque at the expense to top-end performance. Power peak is earlier than the stock Cadillac cam. This cam is perfect for those who enjoy trying to get Honda-like MPG from a much more powerful Caddy Big-Block engine.
Price: $224.95
|
|
|
|
|
MTS #3 - 472/500 Custom Cadillac Camshaft w/ Lifters
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs. MTS #3 Series Grinds: RPM range: Idle to 4000 / Advertised duration range: 250-255* / Duration @ .050" range: 198-205* / Valve lift range: .470-.480". #3 grinds are designed for maximum fuel ecconomy and work best in low-compression engines. When tuned to run 92-Octane fuel, the record is 22 MPG from a 1976, 500cid in a full sized Sedan Deville. Great bottom-end torque at the expense to top-end performance. Power peak is earlier than the stock Cadillac cam. This cam is perfect for those who enjoy trying to get Honda-like MPG from a much more powerful Caddy Big-Block engine.
Price: $299.00
|
|
|
|
|
MTS #5 - 472/500 Custom Cadillac Camshaft
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs.
MTS #5 Series Grinds: RPM range: 1000-4500/ Advertised duration range: 258-266* / Duration @ .050" range: 208-215* / Valve lift range: .495-.510". #5 grinds from MTS are an excellent choice to replace 1974 and newer smog-controlled stock cams. #5 grinds are an updated version of the "Hottest" cam grind used by Cadillac in their production engines. The 1973 Caddy engines were equipped with a stock cam that had specs in this range. These cams run more lift and duration than the 1968-72 and 1974-79 original cams. Stock type idle with excellent economy and a good gain over the stock cam. Works excellent with the stock TH400 transmission shifts points. Just leave it in drive, smash the gas, and let the tranny shift by itself. Peak cruise RPM for efficiency is 2200-2500.
Price: $224.95
|
|
|
|
|
MTS #5 - 472/500 Custom Cadillac Camshaft w/ Lifters
Choosing the proper camshaft for your Cadillac engine is extremely critical, as no other component creates as many variables as its cam. Horsepower, torque, economy, and driveability are all governed by your camshaft choice. Installation of your cam is just as important as it takes the correct parts and information to get it right. Whether you are a novice or an accomplished engine builder, MTS is here to provide the "Cadillac Level of Service" you need and want. Our dedication and expertise with Cadillac engines comes to you as part of being a customer. From our five tried and true MTS cams to our custom designs, MTS is the best place to come for your Cadillac Performance needs.
MTS #5 Series Grinds: RPM range: 1000-4500/ Advertised duration range: 258-266* / Duration @ .050" range: 208-215* / Valve lift range: .495-.510". #5 grinds from MTS are an excellent choice to replace 1974 and newer smog-controlled stock cams. #5 grinds are an updated version of the "Hottest" cam grind used by Cadillac in their production engines. The 1973 Caddy engines were equipped with a stock cam that had specs in this range. These cams run more lift and duration than the 1968-72 and 1974-79 original cams. Stock type idle with excellent economy and a good gain over the stock cam. Works excellent with the stock TH400 transmission shifts points. Just leave it in drive, smash the gas, and let the tranny shift by itself. Peak cruise RPM for efficiency is 2200-2500.
Price: $299.00
|
|
|
|
|
MTS Custom Camshaft.
MTS Custom Cadillac Camshaft. We can have a custom camshaft made for your special needs. Please call for more information.
Price: $224.95
|
|
|
|
advanced search >>
view cart >> checkout >> amount in cart: $0.00
lost your password?
